Wednesday 14 November 2012

Hard Disk

Hard Disk

A hard disk drive (often shortened as hard disk, hard drive, or HDD) is a non-volatile storage device that stores digitally encoded data on rapidly rotating rigid (i.e. hard) platters with magnetic surfaces.

Introduction:
A hard disk is part of a unit, often called a "disk drive," "hard drive," or "hard disk drive," that store and provides relatively quick access to large amounts of data on an electromagnetically charged surface or set of surfaces. Today's computers typically come with a hard disk that contains several billion bytes (gigabytes) of storage.
A hard disk is really a set of stacked "disks," each of which, like phonograph records, has data recorded electromagnetically in concentric circles or "tracks" on the disk. A "head" (something like a phonograph arm but in a relatively fixed position) records (writes) or reads the information on the tracks. Two heads, one on each side of a disk, read or write the data as the disk spins. Each read or write operation requires that data be located, which is an operation called a "seek." (Data already in a disk cache, however, will be located more quickly.)
A hard disk/drive unit comes with a set rotation speed varying from 4500 to 7200 rpm. Disk access time is measured in milliseconds. Although the physical location can be identified with cylinder, track, and sector locations, these are actually mapped to a logical block address (LBA) that works with the larger address range on today's hard disks.

Capacity and Performance:
A typical desktop machine will have a hard disk with a capacity of between 10 and 40 gigabytes. Data is stored onto the disk in the form of files. A file is simply a named collection of bytes. The bytes might be the ASCII codes for the characters of a text file, or they could be the instructions of a software application for the computer to execute, or they could be the records of a data base, or they could be the pixel colors for a GIF image. No matter what it contains, however, a file is simply a string of bytes. When a program running on the computer requests a file, the hard disk retrieves its bytes and sends them to the CPU one at a time.

There are two ways to measure the performance of a hard disk:
      Data rate - The data rate is the number of bytes per second that the drive can deliver to the CPU. Rates between 5 and 40 megabytes per second are common.
      Seek time - The seek time is the amount of time between when the CPU requests a file and when the first byte of the file is sent to the CPU. Times between 10 and 20 milliseconds are common.
The other important parameter is the capacity of the drive, which is the number of bytes it can hold.

Operation of Hard Disk:
A hard disk uses round, flat disks called platters, coated on both sides with a special media material designed to store information in the form of magnetic patterns. The platters are mounted by cutting a hole in the center and stacking them onto a spindle. The platters rotate at high speed, driven by a special spindle motor connected to the spindle. Special electromagnetic read/write devices called heads are mounted onto sliders and used to either record information onto the disk or read information from it. The sliders are mounted onto arms, all of which are mechanically connected into a single assembly and positioned over the surface of the disk by a device called an actuator. A logic board controls the activity of the other components and communicates with the rest of the PC.
Each surface of each platter on the disk can hold tens of billions of individual bits of data. These are organized into larger "chunks" for convenience, and to allow for easier and faster access to information. Each platter has two heads, one on the top of the platter and one on the bottom, so a hard disk with three platters (normally) has six surfaces and six total heads. Each platter has its information recorded in concentric circles called tracks. Each track is further broken down into smaller pieces called sectors, each of which holds 512 bytes of information.

The entire hard disk must be manufactured to a high degree of precision due to the extreme miniaturization of the components, and the importance of the hard disk's role in the PC. The main part of the disk is isolated from outside air to ensure that no contaminants get onto the platters, which could cause damage to the read/write heads.

 
Exploded line drawing of a modern hard disk, showing the major components.    
Though the specifics vary greatly between different designs, the basic
Components you see above are typical of almost all PC hard disks.

Here's an example case showing in brief what happens in the disk each time a piece of information needs to be read from it. This is a highly simplified example because it ignores factors such as disk caching, error correction, and many of the other special techniques that systems use today to increase performance and reliability. For example, sectors are not read individually on most PCs; they are grouped together into continuous chunks called clusters. A typical job, such as loading a file into a spreadsheet program, can involve thousands or even millions of individual disk accesses, and loading a 20 MB file 512 bytes at a time would be rather inefficient:
The first step in accessing the disk is to figure out where on the disk to look for the needed information. Between them, the application, operating system, system BIOS and possibly any special driver software for the disk, do the job of determining what part of the disk to read.
The location on the disk undergoes one or more translation steps until a final request can be made to the drive with an address expressed in terms of its geometry. The geometry of the drive is normally expressed in terms of the cylinder, head and sector that the system wants the drive to read. (A cylinder is equivalent to a track for addressing purposes). A request is sent to the drive over the disk drive interface giving it this address and asking for the sector to be read.
The hard disk's control program first checks to see if the information requested is already in the hard disk's own internal buffer (or cache). It if is then the controller supplies the information immediately, without needing to look on the surface of the disk itself.
In most cases the disk drive is already spinning. If it isn't (because power management has instructed the disk to "spin down" to save energy) then the drive's controller board will activate the spindle motor to "spin up" the drive to operating speed.
The controller board interprets the address it received for the read, and performs any necessary additional translation steps that take into account the particular characteristics of the drive. The hard disk's logic program then looks at the final number of the cylinder requested. The cylinder number tells the disk which track to look at on the surface of the disk. The board instructs the actuator to move the read/write heads to the appropriate track.
When the heads are in the correct position, the controller activates the head specified in the correct read location. The head begins reading the track looking for the sector that was asked for. It waits for the disk to rotate the correct sector number under itself, and then reads the contents of the sector.
The controller board coordinates the flow of information from the hard disk into a temporary storage area (buffer). It then sends the information over the hard disk interface, usually to the system memory, satisfying the system's request for data.


Types of Hard Disk

v Zip /Bernoulli Disks:
A 3.5" removable disk drive from Iomega. Zip disks come in 100MB, 250MB and 750MB varieties, with the latter introduced in 2002 using USB and FireWire interfaces. The 250MB drives, introduced in 1998, also read and write 100MB disks. The 750MB drives read all, but only write 250MB and 750MB disks.
Zip disks are a floppy-like technology that uses design concepts from hard disks and Iomega's earlier Bernoulli disks. The drive is bundled with software that can catalog the disks and lock the files for security. Zip drives were introduced in 1995 and became very popular as a transportable, rewritable storage medium.
Disk Packs:
An early removable hard disk module used in minicomputers and mainframes that contained two or more platters housed in a dust-free container. For mounting, the protective bottom of the unit was removed, and the disk pack was placed into the drive. Then the top part of the disk pack was unscrewed and removed.
Winchester disk
An early removable disk drive from IBM that put the heads and platters (disks) in a sealed unit for greater speed. Introduced in 1973 as the model 3340, the drive had one permanent and one removable spindle, each holding 30MB. The term Winchester comes from an early type of disk drive developed by IBM that had 30MB of fixed storage and 30MB of removable storage and offered a 30 millisecond (ms) access time. So its inventors called it a Winchester in honor of its 30/30 rifle.
What made this drive significant is the technique where the read/write heads would rise or lift off from the disk while the disk increased and lowered when the disk decelerated. This enabled the heads to not have to move off the disk each time the speed was increased or decreased. Future hard drives after the 3340 began to use this as a standard for hard disk drive development. Although modern disk drives are faster and hold more data, the basic technology is the same, so Winchester has become synonymous with hard.